Basically the body of the scooter. Generally it consists of a steel, aluminum, or composite frame with a fiberglass or composite floor to support the feet and batteries. Some scooter bases also include a shroud over the front wheel and drive head, creating a dashboard for the unit. The base also includes the wheels and the drive train. In some scooters, the seat post is also part of the base. The base unit is the primary determinant of whether the scooter is designed for indoor or outdoor use, the vehicle’s maneuverability, the size of its wheelbase, its ground clearance, its turning radius, and its overall dimensions.
A scooter should not tip easily during sharp turns or on inclines such as curb cuts (if the scooter is designed for outdoor use). Anti-tip wheels should be included as part of the frame to help support and stabilize the scooter. On front-wheel drive units, anti-tips are often located laterally just behind the front wheels because they generally lack the power for steep inclines. Because most rear-wheel drive scooters are intended to negotiate more rugged terrain, they are usually equipped with rear anti-tips to support the scooter on hills. Side anti-tip wheels are sometimes offered as options. It should be noted that lateral anti-tippers may cause difficulties on curb cuts and ramps.
On some scooters, the base unit may be comprised of modular units or may otherwise be disassembled for transport and storage. These same features may also allow the scooter to be converted from three- to four-wheeled models and/or from indoor to outdoor use.